Signed in as:
filler@godaddy.com
1
Two Heads. Twelve Targets. Mix on Demand.
Two independently controlled print heads, each paired with a six-target carousel, provide access to up to 12 solid-source materials in a single system. Deliver materials separately or simultaneously to create multi-material structures, tunable mixtures, alloys, and composites in real time.
2
See It. Place It. Print It.
Overlay your geometry directly onto the live overhead camera view of the print area. Position, scale, and align each design on the substrate before printing, giving you complete control over exactly where every feature is placed.
3
Pick It. Match It. Align It.
Select a fiducial on the substrate through the live camera view, then choose its matching point in the CAD design. The software automatically snaps the geometry into position, creating a fast and accurate alignment between the digital design and the physical part.
4
Deposit. Sinter. Build.
As the dry aerosol is deposited, an integrated laser sinters the material directly onto the substrate. Deposition and consolidation happen together, producing conductive and mechanically stable printed features in real time.
5
Control Flow. Stabilize Pressure.
Integrated mass flow control continuously manages the carrier-gas flow while monitoring system pressure in real time. This maintains stable aerosol transport and consistent deposition throughout the printing process.
6
Find Focus. Optimize Particle Generation.
The automated focusing mechanism positions the galvo scanner at the correct focal distance from the target. This keeps the laser precisely focused for efficient and consistent nanoparticle generation.
7
Build the Process Recipe. Run It Again.
Save motion, flow, laser, material, and deposition parameters within a reusable recipe. Complex printing sequences can then be repeated consistently without rebuilding the process each time.
8
Watch Every Step.
Live camera views provide continuous visibility of the substrate, nozzle, and printing area. Operators can confirm positioning, inspect alignment, and follow the deposition process directly from the software.
9
Record More Than the Print.
Process parameters, equipment states, and sensor data can be logged throughout every run. Each print produces a traceable process record for evaluation, optimization, and repeatability.
10
See the Beam. Center It Automatically.
A vision-guided alignment system detects the laser position and uses an automated actuator to center the beam with the nozzle and deposition area. This simplifies setup while maintaining precise alignment on the substrate.